Home > Automatic Crimp Machine > Automatic Terminal Crimping Machine > Full Automatic Wire Cut Strip One End Crimping Another End Stripping
Full automatic wire cut strip one end crimping another end stripping
Full automatic wire cut strip one end crimping another end stripping
  • Full automatic wire cut strip one end crimping another end stripping

  • Model No: 501S
  • Full automatic wire cut strip one end crimping another end stripping tinning 501S
    Capacity Wire length 50mm, about 3,200 wires/hour (no twisting)
    Applicable wire diameter AWG # 32 ~ AWG#18
    Processing length (Central section with jacket remaining) 18mm~ 99,990mm (wire clip can be refitted to 8mm)
    Stripping length Front 0.1~8.0mm rear 0.1~18.0mm
    Cutter depth Maximum adjustment 3.50mm resolution 0.01mm
    Cutting tolerance Modifiable
    Crimping capacity 2 Tons
    Detection device Low air pressure, existing of electric wire, existing of the terminal, abnormal stripping, abnormal crimping, abnormal ingoing wire.
    Auxiliary device Prewire feeding synchronizer, terminal waste paper rewinding device
    Power supply single phase, AC180V~242V, 50/60Hz, 10A
    Compressed air 0.5 MPa(5kgf / cm2) clean dry air
    Dimension 1,800W × 900D × 1,450H, about 400KG
  • Inquiry now
Detailed description

Full automatic cut strip one end crimping another end stripping tinning 501S
Features
1. cut off the wire, peeling, tin and other related actions will be automatically adjusted with time.
2. the production line can range from AWG18-AWG32, which is very practical.
3. this machine has the function of twisting.
4. ultra short line: middle leaving glue for 18mm
5. the machine's Tin angle is close to 90 degrees so that the diameter of the wire is evenly distributed.
6. the machine adjusts the depth of spots by dispersion control. Make the spot depth more accurate.
7. the machine is suitable for horizontal, straight OTP mold.


Model

WPM-501S

Capacity

Wire length 50mm, about 3,200 wires/hour (no twisting)

Applicable wire diameter

AWG # 32 ~ AWG#18

Processing length

(Central section with jacket remaining) 18mm~ 99,990mm (wire clip can be refitted to 8mm)

Stripping length

Front 0.1~8.0mm   rear 0.1~18.0mm

Cutter depth

Maximum adjustment 3.50mm    resolution 0.01mm

Cutting tolerance

Modifiable

Crimping capacity

2 Tons

Detection device

Low air pressure, existing of electric wire, existing of terminal, abnormal stripping, abnormal crimping, abnormal ingoing wire.

Auxiliary device

Prewire feeding synchronizer, terminal waste paper rewinding device

Power supply

single phase, AC180V~242V, 50/60Hz, 10A

Compressed air

0.5 MPa(5kgf / cm2) clean dry air

Dimension

1,800W × 900D × 1,450H, about 400KG


Send us your question about this product
web code
Related products
  • Copyright @ 2003-2024XIAMEN JINGWEI TECHNOLOGY CO., LTD.
  • E-mail sales@cablecutting.net npsales@126.com
  • Contact: Mr. Kevin, Ms. Donna
  • Tel:+86-0592-8628902 Mobile:+86-18965153335 Skype: kevin201166 Fax:+86-0592-6065010